Model I ndentification:
CBQ-80-65-160-F-A
| 1 | Model | CBQ |
| 2 | Inlet | 80mm |
| 3 | Outlet | 65mm |
| 4 | Impeller | 120mm |
| 5 | Flow parts are fluorine plastic/PTFE | |
Mag drive pump-CQB detailed introduction:
CQB-FA series plastic magnetic drive pump is a long-bracket type magnetic drive pump, which is resistant to strong corrosion and leak-free. The pump and motor are fixed on a common base, with good stability and lower operating noise and vibration. The structure is designed as a long bracket type. When repairing and replacing parts, the core components can be directly drawn out from the back without disassembling the pipeline and base, which saves man-hour maintenance and cost, which greatly facilitates customers. The pump applies the principles of modern magnetism and uses permanent magnets to achieve non-contact indirect transmission of a chemical process pump. When the motor drives the outer rotor ( outer magnet) assembly to rotate, the magnetic field lines pass through the isolation sleeve to drive the inner rotor (ie, inner magnet) assembly and the impeller to rotate synchronously, and the medium is completely enclosed in the stationary isolation sleeve. , So as to achieve the purpose of pumping the medium without leakage, completely solve the leakage of the shaft seal of the mechanical transmission pump, and it is a fully sealed, leak-free, pollution-free chemical process pump.
Design features: The pump chamber is completely enclosed, and the impeller is indirectly driven by the magnetic coupling. Without the shaft seal, it meets the requirements of zero leakage and pollution-free working conditions.
Structure and use: The flow parts are made of fluoroplastics, with high corrosion resistance. The load-bearing part of the pump is made of metal materials, which can withstand the weight of pipes and fluids and mechanical impact; it can safely transport strong acids, alkalis, organic solvents, etc.suitable for various This kind of chemical process fully meets the requirements of safety, reliability and environmental protection.
It is widely used in chemical, acid and alkali, refining, rare earth, pesticide, dye, medicine, papermaking, electroplating, electrolysis, pickling and other industries to transport any concentration of acid and alkali. Oils, rare precious liquids and toxic liquid chemical solutions, especially easy to leak, flammable and explosive liquid transportation.
Specification:
| Model | Capacity M3/h | Head (m) | Effectiveness % | Cavitation margin | In/outlet mm | Speed r/min | Motor kw | Weight kg |
| CQB50-32-160FA | 12.5 | 32 | 39 | 3.5 | 50x32 | 2900 | 4 | 140 |
| CQB5O-32-2OOI-A | 12.5 | 50 | 31 | 3.5 | 50X32 | 2900 | 7.5 | 210 |
| CQB65-50-I60FA | 25 | 32 | 51 | 4 | 65X50 | 2900 | 7.5 | 210 |
| CQB65-40-200FA | 25 | 50 | 48 | 4 | 65X40 | 2900 | 11 | 250 |
| CQB80-65-I60I-A | 50 | 32 | 60 | 4 | 80X65 | 2900 | 11 | 285 |
| CQB8O-5O-2OOI-A | 50 | 50 | 60 | 4 | 80x50 | 2900 | 18.5 | 320 |
| CQB100-80-1601-A | 100 | 32 | 58 | 5 | JG0X80 | 2900 | 18.5 | 350 |
Mag drive pump-CQB detailed introduction:
The CQB series magnetic drive pumps front casing material is made from Fluoroplastic or PTFE and the pump housing is made from cast iron.
CQB-FA series plastic magnetic drive pump is a long-bracket type magnetic drive pump, which is resistant to strong corrosion and leak-free. The pump and motor are fixed on a common base, with good stability and lower operating noise and vibration. The structure is designed as a long bracket type. When repairing and replacing parts, the core components can be directly drawn out from the back without disassembling the pipeline and base, which saves man-hour maintenance and cost, which greatly facilitates customers. The pump applies the principles of modern magnetism and uses permanent magnets to achieve non-contact indirect transmission of a chemical process pump. When the motor drives the outer rotor ( outer magnet) assembly to rotate, the magnetic field lines pass through the isolation sleeve to drive the inner rotor (ie, inner magnet) assembly and the impeller to rotate synchronously, and the medium is completely enclosed in the stationary isolation sleeve. , So as to achieve the purpose of pumping the medium without leakage, completely solve the leakage of the shaft seal of the mechanical transmission pump, and it is a fully sealed, leak-free, pollution-free chemical process pump.
Design features: The pump chamber is completely enclosed, and the impeller is indirectly driven by the magnetic coupling. Without the shaft seal, it meets the requirements of zero leakage and pollution-free working conditions.
Structure and use: The flow parts are made of fluoroplastics, with high corrosion resistance. The load-bearing part of the pump is made of metal materials, which can withstand the weight of pipes and fluids and mechanical impact; it can safely transport strong acids, alkalis, organic solvents, etc.; suitable for various This kind of chemical process fully meets the requirements of safety, reliability and environmental protection.
It is widely used in chemical, acid and alkali, refining, rare earth, pesticide, dye, medicine, papermaking, electroplating, electrolysis, pickling and other industries to transport any concentration of acid and alkali. Oils, rare precious liquids and toxic liquid chemical solutions, especially easy to leak, flammable and explosive liquid transportation.
